volvo — Volvo VNL and VNM Operator's Manual

Pre-Trip Inspection and Daily Maintenance 43 W0001361 NOTE! Refer to the trailer manufacturer’s manual for specific information on the trailer checks. Step 13: Left Rear Trailer Wheels Area If equipped with sliding axles, check position and alignment. Look for dam- aged, worn or missing parts, all locks present, fully in place and locked. Dual Wheels, One Or Two Axles Check condition of wheels and rims. Especially look for cracks, lockrings missing, bent or broken spacers, studs, clamps or lugs. Check condition of tires:

properly in- flated, no serious cuts, bulges, tread wear or any signs of misalignment; valve stems not touching wheels, rims or brake drums; valve caps in place and no objects stuck between the wheels. Check that both tires are of same type, for example, not mixed radial and bias type and that their circumferences are matched. Check wheel bearing and hub: no obvi- ous leaking on outside or inside wheel. Flexible air tubing not cracked, cut, crimped or otherwise damaged. It should be secured against tangling, dragging and chafing. Brakes Condition of brake drums. With brakes released, look for a noticeable gap be- tween lining and drum (This check can not be made if dust covers are in place).

Condition of brake hoses: check for any chafing. Check brake chamber mounting bolts and brackets. Suspension Condition of springs (leaf or air), spring hangers, shackles and U-bolts. Axle alignment. Condition of torque rod arms. Check slack adjusters and chamber push rod travel. With brakes applied or released, look for conspicuously dif- ferent positions of the slack adjusters. Check spring brakes.