BF25D.B F30D 2. TORQUE VALUES Item Thread dia. x pitch Torque kgfm Remark N m Ibfeft Engine Crankcase M8 x 1.25 27 2.8 20 *1 Apply oil to the threads and seat- ing surface. Crankcase Oil filter holder Oil filter cartridge Cylinder head bolt (L=83 mm) M6 x 1 .O M20 x 1.5 M20 x 1.5 M8 x 1.25 12 18 11 27 1.2 1.8 1.1 2.8 9 13 8 20 *1 Apply oil to the threads and seat- ing surface. Apply oil to the threads and seat- ing surface. Cylinder head bolt (L=40 mm) M8 x 1.25 27 2.8 20 Carburetor bolt Connecting rod nut M6 x 1 .O M7 x 0.75 10 24 1 .o 2.4 7 17 Apply oil to the threads and seat- ing surface. Apply oil to the threads and seat- ing surface.
Tappet adjusting lock nut M5 x 0.5 8 0.8 5.8 Drain plug bolt Exhaust pipe bolt Oil pan bolt Oil pump bolt Oil strainer bolt Timing pulley nut M12 x 1.5 M8 x 1.25 M6 x 1 .O M6 x 1 .O M6 x 1 .O M34 x 1 .O 23 22 10 13 13 64 2.3 2.2 1 .o 1.3 1.3 6.5 17 16 7 9 9 47 Apply oil to the threads and seat- ing surface. Timing belt tensioner bolt Timing belt adjusting spring bolt 18 mm Special nut (flywheel nut) MlOx 1.25 M6 x 1 .O M18x 1.5 44 12 39 4.5 1.2 4.0 33 9 29 *2 Apply oil to the threads and seat- ing surface. Oil pressure switch ECT sensor PT1/8 M12 x 1.5 9 18 0.9 1.8 6.5 13 Apply oil to the threads. Spark plug Starter cable terminal nut CDI unit bolt .
Gear case Pinion gear nut Gear case bolt Oil check bolt Drain plug Water screen nut Impeller housing bolt Water bottom screen nut Propeller castle nut M12 x 1.25 M6 x 1.0 M6 x 1 .O 18 5 5 1.8 0.5 0.5 13 3.6 3.6 ~ M10 x 1 .O M10 x 1.25 M8 x 1.25 M8 x 1.25 M5 x 0.8 M6 x 1 .O M5 x 0.8 M14x 1.5 39 34 3.5 3.4 1 11 1 1 - 3 5 4.0 3.5 0.35 0.35 0.1 1.1 0.1 0.1 - 3.5 29 25 2.5 2.5 0.7 8 0.7 0.7 - 25 *3 2-3