B F25 DaB F30D 11 1 6 mm CAP NUT (2) 4. CARBURETOR ASSEMBLY INSTALLATION 1) Install a new intake manifold gasket and carburetor assembly on the cylinder head. 2) Loosely tighten the two 6 mm cap nuts and four 6 x 32 mm flange bolts. 3) Tighten each bolt and nut in a criss-cross pattern in two or three steps to the specified torque. TORQUE: 12 N-m (1.2 kgf-m, 9 Ibf-ft) / 6 x 32 (4) [2] CARBURETOR ASSEMBLY [3] FUEL TUBE CLAMP 6 x 1 2 [4]6 mm CAP NUT(2) 12 N.m (1.2 kgf.m, 9 Ibf.ft) 511 6