BF25D/30D BF25D-BF30D — Sep '94

B F25D.B F30D Friction disc Installation Install the friction disc by aligning the grooves of the throttle friction disc with the bosses of the tiller handle as shown. [1 I THROTTLE [2] TILLER HANDLE / [3] BOSS I Grip Pipe Installation 1)lnstall the throttle cable pin on the cable pivot with the dimensions of the projected length at both ends of the pin as shown. THROTTLE CABLE PIN \- Q 2)lnstall the grip pipe on the tiller handle by turning it counterclockwise slowly. 3) Install the throttle friction pad by aligning its groove with the boss on the throttle friction disc. 4) Install the throttle friction grip onto the throttle friction pad.

[7] INNER WALL _ _ _ _ 1 THROTTLE FRICTION GRIP [6] THROTTLE FRICTION PAD [7] INNER WALL [4] CIRCUMFERENCE Grip Rubber Installation 1) Turn the throttle grip pipe clockwise fully (to the fully close position) and tighten the throttle friction grip to hold the grip pipe. GRIP RUBBER FULLY CLOSE 2) Install the grip rubber by aligning the mark on the grip rubber with the fully close position mark mark) of the throttle and tighten the 6 x 12 mm flange bolt securely. 15-8