B F25DoBF30D Emergency Stop Switch Check for continuity between the terminals. There must be continuity between the terminals marked with circle in the table below. [l] BLACK Blac k/Red Black Normal Push or remove clip \ 131 EMERGENCY STOP SWITCH Ignition Switch Check for continuity between the terminals. There must be continuity between the terminals marked with circle in the table below. [l] IGNITION SWITCH \ OFF Black/ White/ Black/ Black/ 'lack Red Black Yellow White 0 0 0 0 [2]BLACK ON 31 WHITWBLACK [4] BLACWRED BLACWHITE START I I I @ - k F k I [6] BLACWELLOW Indicator NOTE Be sure the battery is in good condition before perform- ing this test.
1) Connect the 12V battery between the black/yellow (+) terminal and the red (-) terminal of the indicator. Be sure that the red light (LED) comes on. 2) Connect the 12V battery between the blacWyellow (+) terminal and the yellow (-) terminal of the indicator. Be sure that the green light (LED) comes on. 15-1 2