A. Current failure information Current status of failure is displayed (Failure code, failure contents). REALTIME FAIL 1/2 CODE : V204-05 2/2 CODE : E011-04 When a number of failures are produced, failure information can be checked using "UP" ( , 1 on Figure 23) or "DOWN" ( , 2 on Figure 23) button. Relief Pressure Up S/V Current below normal (CURRENT BELOW NORMAL or open circuit) * 1/2: A serial number of current failure/ total quantity of failure. * Vxxx-xx: Vxxx is a unique code and xx is a FMI (Failure Mode Identifier) number. : UP : DOWN Figure 33 FG000565 - V: Machine related failure code - E:
Engine related failure code Refer to the failure information code for unique codes and FMI numbers. This example shows one of two failures. B. Past failure information Memorized record of past failure is displayed (Failure code, failure contents). FAILURE LOG When a number of failures are produced, failure information can be checked using "UP" ( , 1 on Figure 23) or "DOWN" ( , 2 on Figure 23) button. 1/2 CODE : V204-05 2/2 CODE : E011-04 Period:00254Hr 29m Number:08 Relief Pressure Up S/V Current below normal (CURRENT BELOW NORMAL or open circuit) NOTE: " Number: xxx ": "xxx" means that the totally counted number of the same failure. " Period:xxxxxHrxxm ":
It indicates the period for which machine has operated until a failure takes place. (For more than two occurrences of the same failure, until the first occurrence time.) : UP : DOWN FG000566 Figure 34 C. Failure record deletion This mode is used to delete the memorized record of past failure. If this mode is selected, all records will be deleted. DELETE FAIL LOG All Fail Log will be DELETED. When "YES" ( , 3 on Figure 23) button is pressed, the memorized record will be deleted. At this time, deletion signal will be displayed and the screen will move to previous menu after deletion. This screen will be displayed during 3 seconds. : Yes ESC:
No Figure 35 FG000567 SP001727 Electrical System Page 42