Removing and installing injection pump Fig. 5 Remove charge-air pipe of the left-hand cylinder bank. Remove injection lines. Disconnect all fuel, oil and air (aneroid device) pipes from injection pump. 5 Fig. 6 After removal of the injection lines we recommend fitting caps to the connections on the injection nozzles and injection pump. This prevents dirt from getting into the injection system. Caution: Dirt in the injection system causes: D nozzles to jam D the injection-pump drive gear to break 6 Fig. 7 D 2848 L.. only: In 8-cylinder engines the injection pump can be removed only if the intercooler is taken off first. 7 Fig. 8 Remove mounting bolts from injection pump (17 mm). Note:
For reasons of space the mounting bolts between the injection pump and the left- hand cylinder bank can be reached only with a 3/8” socket spanner with extension. Take off injection pump. 8 40