Removing and installing fuel injectors Removing fuel injectors Fig. 1 Remove injection lines and leakage fuel return lines. 1 Fig. 2 Remove pressure screw from fuel injector using a pin spanner. 2 Fig. 3 Bolt inertia puller on to fuel injector and knock out the injector. Take out injector seal. Check and repair injector. 3 Installing fuel injectors Fig. 4 Apply “Never Seeze” to contact areas of injector. Screw in injector with new seal. Screw on union nut and tighten to specified torque. Connect up injection lines and leakage fuel return lines. 5 43