MAN — Repairing water pump

Repairing water pump Fig. 4 Knock out cap by driving a suitable mandrel under the cap at the notch (arrow). 4 Fig. 5 Pull impeller off the pump bearing. For this pur- pose two (from engine no. ... 5025 001 .... on- wards four) M8 threaded bores are provided. 5 Fig. 6 Centre the pump housing on a suitable holder. Use suitable mandrel to press the water pump shaft with bearing out of the housing. The shaft and bearing are encapsulated and are exchanged together only. When pressing out, place support under water pump housing. 6 Assembling water pump Fig. 7 Press in water pump bearing. Use hollow mandrel to press on the outer bearing ring and not on the bearing shaft. 7 54