Repairing water pump Disassembling water pump The following special tools are required for disas- sembling and assembling the water pump: D Press D Improvised tools (see page 176). 3 Fig. 1 1 4 1 Hub 2 Circlip 3 Impeller 4 Cap 5 Pump bearing 6 Mechanical seal 5 6 Remove water pump (see page 51). 2 1 Fig. 2 Clamp water pump in vice (using soft jaws). Pull off hub with special puller or three-arm puller. 2 Fig. 3 Unclip the circlip from the water-pump housing. Knock out cap by driving a suitable mandrel under the cap (4) at the notch. Pull impeller (3) off the pump bearing. For this pur- pose two (from engine no. ... 5025 001 .... on- wards four) M8 threaded bores are provided.
Push out mechanical seal. 3 53