1.10 CRANKSHAFT ASSEMBLY 4. Install all the main bearing caps (including the center bearing cap) with their bearing shells, on the crankcase journals, pressing them in with the fingers and making sure the guide pins are correctly aligned. See Figure 1-65. 1. Main Bearing Cap(s) 3. Bearing Cap Bolts (14 qty.) 2. Main Bearing Cap (center) Figure 1-65 Bearing Caps NOTE: Make sure the numbers on the bearing caps are in ascending order, starting from the front of the engine. All information subject to change without notice. 1-76 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION