EPA07 MBE 4000 SERVICE MANUAL 1.15.1 Replacement of Ring Gear Replacement steps are as follows: 1. Remove the flywheel from the crankshaft flange. Refer to section 1.14.1. BURNS To avoid injury from burning, use lifting tools and heat-resistant gloves when handling heated components. 2. Heat the ring gear on the flywheel with a torch and press the gear off. See Figure 1-88. Figure 1-88 Ring Gear All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-101