Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

1.19 PISTON, PISTON RING, AND CONNECTING ROD 2. Remove the piston rings using ring pliers (J-46072). Remove the rings in order, starting from the top of the piston down. See Figure 1-116. See Figure 1-117. 1. Keystone Piston Ring (Groove I) 3. Double Chamfered Oil Control Ring with Garter Spring (Groove III) 2. Taper Face Ring with Internal Angle (Groove II) 4. Piston Figure 1-116 Piston Rings 1. Piston 2. Ring Pliers (J-46072) Figure 1-117 Piston Rings 3. Clean all the carbon from the ring grooves. Be sure the grooves are not damaged, and that there are no burrs or combustion residue in the grooves. All information subject to change without notice.

1-132 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION