Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

1.20 VALVES 5. Using the valve spring compressor (J–46173), install the spring seats, springs, spring retainers, and valve keepers. Check the valve keepers to ensure they are locked in place. See Figure 1-133. 1. Valve 2. Cylinder Head Figure 1-133 Valve 6. Remove the valve spring compressor (J–46173) from the cylinder head. 7. Install the cylinder head. Refer to section 1.3.2. 1.20.5 Replacement of Valve Stem Seal and Valve Stem Sealing Ring Replacement steps are as follows: NOTE: Always replace the valve stem seal and valve stem sealing ring if the exhaust valve has been removed. 1. Remove the cylinder head from the engine. Refer to section 1.3.1. NOTE:

Use care during removal to not damage the valve guides and valve stems. All information subject to change without notice. 1-150 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION