Table 1-49 Head Warpage Limits Table 1-50 Specifications for Measuring Cylinder Liner Protrusion Table 1-51 Cylinder Head Bolt Lengths Table 1-52 Tightening Stages, Cylinder Head Bolts Table 1-53 Oil Pressure Readings Table 1-54 Cylinder Head Torque Values All information subject to change without notice. 1-170 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION Description mm (in.) Limit mm (in.) Over a length of 150 (6) 0.15 (0.006) Description Value: mm (in.) Cylinder Liner Protrusion from block 0.2305-0.330 (0.0090-0.0130) Difference between the four measuring points Max.:
0.02 (0.0008) Description Length mm (in.) Shaft length when new 210.0 (8.27) Maximum shaft length 212.0 (8.35) Size Max. Shaft Length mm (in.) Tightening Stage Torque Nm (lb ft) (Repair work in the field) M15 x 2 212.0 (8.35) Stage 1 10 (7) Stage 2 50 (37) Stage 3 100 (74) Stage 4 200 (148) Stage 5 90° more Stage 6 90° more Description Minimum Oil Pressure Reading kPa (psi) Engine at Idle Speed 50 (7) Engine at Max. rpm 250 (36) Description Torque N·m (lb·ft) Exhaust Manifold Bolts 50 (37); then another 90° Inspection Cover on Flywheel Housing 25 (18) Rocker Arm Mounting Bolts 60 (44); then another 90°