EPA07 MBE 4000 SERVICE MANUAL Table 1-55 Cylinder Head Specifications Table 1-56 Compression Pressure Test Data Table 1-57 Tensioning Arm Bolt Torque Values All information subject to change without notice.
DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-171 What To Measure How To Measure mm (in.) Maximum Permissible Warpage of Head Mating Surface Lengthwise and Diagonally 0.015 (0.006) Maximum Permissible Parallelism Deviation of Head Mating Surface At Each of the Four Corners 0.1 (0.004) Overall Height of Cylinder Head When New 113.85-114.15 (4.482-4.494) After Machining 113.5 (4.47) Description Pressure kPa (psi) Minimum Compression Pressure Valve 2800 (406) Permissible Difference Between Individual Cylinders 400 (58) Description N·m (lb·ft) Tensioning Arm Bolts 50 (37)