Piston, Piston Ring and Connecting Rod The piston projection specifications are listed in Table 1-73. The piston ring end-gap dimensions are listed in Table 1-74. Listed in Table 1-75 are the pistons inspection specifications. The tightening stages for the connecting rod stretch bolts are listed in Table 1-76. The connecting rod dimensional tolerances are listed in Table 1-77. Listed in Table 1-78 are the connecting rod bearing play specifications. The specifications for the diameter of the bearing bore are listed in Table 1-79. Listed in Table 1-80 are the bearing journal specifications. The connecting rod bushing specifications are listed in Table 1-81.
Table 1-73 Piston Projection Specifications Table 1-74 Piston Ring End-Gap Dimensions Table 1-75 Piston Inspection Specifications Table 1-76 Tightening Stages, Connecting Rod Stretch Bolts All information subject to change without notice.
1-176 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION Description mm (in.) Piston Projection (from TDC) 0.244 to 0.715 (0.0096 to 0.0282) Ring Designation Groove Gap When New, mm (in.) Maximum End Gap, mm (in.) Keystone I 0.45 to 0.60 (0.018 to 0.024) 1.0 (.039) Taper-Faced with Internal Angle II 0.40 to 0.55 (0.016 to 0.022) 1.0 (.039) Double-Chamfered Oil Control with Garter Spring III 0.40 to 0.55 (0.016 to 0.022) 1.0 (.039) Description Dimensions: mm (in.) Piston Compression Height 79.50-79.55 (3.130-3.132) Wrist Pin Bore Diameter 52.03-52.04 (2.0484-2.0488) Wrist Pin Diameter 51.992-51.998 (2.0469-2.0472) Max.
Shaft Length mm (in.) Tightening Stage Torque Value N·m (lb·ft) 68.5 (2.70) Stage 1 108 (80) Stage 2 Additional 90 degree rotation