Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL NOTICE: If the electronic unit pump doesn't come out easily, do not try to pry up on the body of the pump. This will damage it. 10. If the electronic unit pump is locked up, or frozen, in its seat, release it using the blade of a small screwdriver under the flange where the mounting bolt attaches. See arrow in Figure 2-6. Figure 2-6 Locked-up electronic unit pump 11. Remove both mounting bolts completely. Carefully pull the electronic unit pump out of the cylinder block. See Figure 2-7. 1. Mounting Bolt 3. Cylinder Block 2. electronic unit pump Figure 2-7 electronic unit pump All information subject to change without notice.

DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-9