Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 2.3 FUEL OVERFLOW VALVE The following sections support the repair of the fuel overflow valve. 2.3.1 Removal of Fuel Overflow Valve Removal steps are as follows: 1. High-Pressure Fuel Line 5. Fuel Gallery Outlet 2. Overflow Valve 6. Hollow-Core Banjo Bolt 3. Washers 7. Fuel Return Line Banjo Fitting 4. Nozzle Line Banjo Fitting Figure 2-13 Overflow Valve 1. Remove the banjo bolt and washers securing the fuel return line to the overflow valve. Discard the washers. 2. Remove the overflow valve and washers from the fuel spill banjo fitting. Discard the washers. 2.3.2 Installation of Fuel Overflow Valve Installation steps are as follows: 1.

Install new washers between the fuel spill banjo fitting and install the fuel overflow valve. Torque the overflow valve to 50 N·m (37 (lb·ft). 2. Secure the fuel return line to the overflow valve with banjo bolt and new washers. Torque the banjo bolt to 50 N·m (37 (lb·ft). All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-19