EPA07 MBE 4000 SERVICE MANUAL PERSONAL INJURY To prevent the escape of high pressure fuel that can penetrate skin, ensure the engine has been shut down for a minimum of 10 minutes before servicing any component within the high pressure circuit. Residual high fuel pressure may be present within the circuit. FIRE To avoid injury from fire, keep all potential ignition sources away from diesel fuel, including open flames, sparks, and electrical resistance heating elements. Do not smoke when refueling. FIRE To avoid injury from fire caused by heated diesel-fuel vapors: Keep those people who are not directly involved in servicing away from the engine.
Stop the engine immediately if a fuel leak is detected. Do not smoke or allow open flames when working on an operating engine. Wear adequate protective clothing (face shield, insulated gloves and apron, etc.). To prevent a buildup of potentially volatile vapors, keep the engine area well ventilated during operation. 1. Remove both engine trim covers. 2. Remove the cylinder head cover for each cylinder head. 3. Remove the intake manifold. 4. To prevent the transfer tube from rotating during the high pressure fuel line disassembly, secure the transfer tube thrust nut using a 24 mm fuel line wrench (J-47484 or J-45063) All information subject to change without notice.
DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-21