2.4 HIGH PRESSURE FUEL LINE AND TRANSFER TUBE and loosen the high pressure fuel line nut at the transfer tube using a 17 mm fuel line wrench (J-47483) or a 17 mm open end wrench. See Figure 2-14. 1. Unit Pumps 5. Mounting Bracket 2. Damper Clamps 6. Mounting Bracket 3. Fuel Injector 7. Bracket Bolts 4. Bolts Figure 2-14 High Pressure Fuel Line To avoid injury from the sudden release of a high-pressure hose connection, wear a face shield or goggles. PERSONAL INJURY NOTICE: The high pressure fuel line and transfer tube are one-time use items. Failure to install a new high pressure fuel line and transfer tube will cause fuel leaks and high pressure fuel line failures. 5.
Using a 17 mm fuel line wrench (J-47483) or a 17 mm open end wrench, loosen the high pressure fuel injector line nut at the injector unit pump. Discard the high pressure fuel injector line. See Figure 2-14. 6. Using 24 mm fuel line wrench (J-45063 or J-47484), loosen the thrust nut on the transfer tube. Remove and discard the transfer tube and the O-ring. See Figure 2-14. All information subject to change without notice. 2-22 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION