2.4 HIGH PRESSURE FUEL LINE AND TRANSFER TUBE 9. Torque the high pressure fuel line mounting bracket bolts to 25 N·m (18 lb·ft.). Torque the damper clamp bolt and nut to 12 N·m (9 lb·ft.). 1. Unit Pumps 5. Mounting Bracket 2. Damper Clamps 6. Mounting Bracket 3. Fuel Injector 7. Bracket Bolts 4. Bolts Figure 2-19 Mounting Bracket 10. Install the air intake manifold. 11. Install the cylinder head cover. ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. NOTICE: Do NOT loosen any high pressure fuel injector line nuts or other fuel line connections for priming purposes.
Use the priming port on the fuel filter housing for engine S/N 0460810824 (EGR) or S/N 0460805219 (non-EGR) and higher. Engines built prior to the change points will have the priming port installed through All information subject to change without notice. 2-28 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION