Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL space in some engine configurations may mean that the 120 degree turn will have to be completed in two turns of 60 degrees, or one nut flat each. Figure 2-18 Turning Fuel Line Nut 120 Degrees At Transfer Tube End NOTICE: To avoid damage to the high pressure fuel injector lines when applying torque, ensure that the transfer tube thrust nut is held in place with a 24 mm wrench such as (J-45063 or J-47484). 8. Loosely install the damper clamp onto the high-pressure fuel line and attach it to the mounting bracket. See Figure 2-19. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-27