2.8 MOTOR CONTROL MODULE 8. Close the hood. Start and run the engine, check for normal operation. NOTICE: Whenever the MCM is replaced or the EEPROM values are lost, the air mass flow of the engine must be re-calibrated to ensure proper engine EGR and smoke control operation. 9. Connect DDDL® 7.0 and turn the ignition to the "ON" position,. code SPN 132 FMI 13 (Air Mass Adaptation Required) will appear. To clear the code run the Air Mass Adaptation service routine. If any other codes appear, refer to the MBE 4000 DDEC VI Troubleshooting Guide, 6SE568. All information subject to change without notice. 2-46 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION