2.14 FUEL PUMP DRIVE 2.14 FUEL PUMP DRIVE The following sections support the fuel pump drive. 2.14.1 Removal of Fuel Pump Drive Removal steps are as follows: 1. Remove the fan from the water pump pulley by removing six bolts. 2. Remove the crankshaft vibration damper from the engine through the opening in the bumper. 3. Remove the fuel pump. Refer to section 2.13.1. 4. Remove the alternator/air conditioning bracket. 5. Remove the bolts securing the camshaft cover to the cylinder block and remove the cover. 6. Remove the fuel pump driven gear bolt while holding the fuel pump drive splines with locking tool (J-46187).See Figure 2-38.
Figure 2-38 Fuel Pump Gear Locking Device J-46187 All information subject to change without notice. 2-60 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION