Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

2.16 DOSER BLOCK ASSEMBLY 1. Secure the doser block assembly to the mounting bracket with three bolts. Torque the bolts to 25 N·m (18 lb·ft). 2. Torque the fuel doser valve connector union fitting to 15 N·m (11 lb·ft). 3. Torque the fuel supply line connector fitting to 15 N·m (11 lb·ft). 4. Connect the electrical harness connectors to the fuel cutoff valve, fuel compensation pressure sensor, electronic dosing valve and fuel line pressure sensor, on the doser block assembly. All information subject to change without notice. 2-70 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION