EPA07 MBE 4000 SERVICE MANUAL 2.A ADDITIONAL INFORMATION Description Page SPECIFICATIONS ............................................................................................. 2-73 Fuel Injectors .................................................................................................. 2-73 Fuel and Fuel Control ..................................................................................... 2-74 Special Tools .................................................................................................. 2-74 SPECIFICATIONS This section contains the specifications for servicing the engine. Fuel Injectors The fuel system torque values are listed in Table 2-2.
The torque values for the fuel lines are listed in Table 2-3. Table 2-2 Fuel System Torque Values All information subject to change without notice.
DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-73 Fastener Type N·m (lb·ft) Protective Sleeve 45 (33) Cylinder Head Tensioning Arm Bolt 50 (37) Electronic unit pump Mounting Bolts 65 (48) Fuel Pump Mounting Bolts 25 (18) Fuel Pump Driven Gear Bolt Checking Torque 30 (22) Fuel Temperature Sensor to Engine Block 30 (22) Fuel/Water Separator Mounting Nuts 50 (37) Fuel Pump Mounting Bolts 25 (18) Fuel Pump Driven Gear Bolt Checking Torque 30 (22) Fuel/Water Separator Mounting Nuts 50 (37) Fuel Injector Harness Nuts 2 (1.5) Dosing Fuel Line Nut at the FDV Connector 15 (11) Dosing Fuel Line Nut at the Doser Block Assembly Connection 15 (11) Dosing Fuel Line Nut at the Fitting Connector 15 (11) FDV Lower Cover Bolts 25 (18) FDVUpper Cover Bolts 10 (7)