3.4 CAMSHAFT LUBRICATION NOZZLE 3.4.2 Installation of Camshaft Lubrication Nozzle Installation steps are as follows: 1. Align the guide pin on the lubrication nozzle with the hole in the block and secure with the hollow-core bolt. See Figure 3-11. 2. Torque the hollow-core bolt to 20 N·m (15 lb·ft). 3. Remove the engine barring tool (J–46392) and install the inspection cover. Torque bolts on the cover to 25 N·m (18 lb·ft) See figure3-9. 4. Install the oil pan. Refer to section 3.2.2. 5. Fill the crankcase to the specified oil capacity listed in Table 3-4. Do not overfill the crankcase. All information subject to change without notice.
3-14 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION