Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 3.5 OIL PUMP AND SUCTION PIPE The follow sections support the repair of the oil pump and suction pump. 3.5.1 Removal of Oil Pump and Suction Pipe Removal steps are as follows: 1. Remove the oil pan from the cylinder block. Refer to section 3.2.1. 2. Remove the suction pipe and gasket from the oil pump, see Figure 3-14. Discard the gasket. [a] Remove the bolts attaching the suction pipe brackets to the cylinder block and to the suction pipe. [b] Remove the two bolts attaching the suction pipe to the oil pump. Discard the gasket. [c] Remove the suction pipe and bracket from the oil pump. 3.

Remove the bolts attaching the pressure relief valve to the oil pump and lower edge of the cylinder block. Remove the pressure relief valve from the oil pump. See Figure 3-14. 1. Suction Pipe 5. Bolts (Relief Valve) 2. Bolt (Suction Pipe Mounting) 6. Bracket and Suction Pipe 3. Oil Pump 7. Oil Pan 4 .Oil Pressure Relief Valve Figure 3-14 Oil Pump and Suction Pipe All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 3-15