Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

3.8 ENGINE OIL PRESSURE/TEMPERATURE SENSOR 2. Connect the wiring harness at the Engine Oil Pressure/Temperature Sensor. 3. Using a new O-ring (if necessary), install the oil filter cap. Tighten the nut to 25 N·m (18 lb·ft). ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. 4. Start the engine. Check the gauge for the correct oil pressure as listed in Table 3-3. 5. Check and add engine oil as needed. All information subject to change without notice. 3-32 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION