EPA07 MBE 4000 SERVICE MANUAL NOTE: The lower exhaust mounting bolt cannot be fully removed with the exhaust manifold installed. Loosen the bolt enough to provide clearance for the coolant vent line to be removed. See Figure 4-18. Figure 4-18 Lower Heat Shield Bracket and Mounting Bolt 18. Remove the doser injector coolant line banjo bolt and seal rings from the #6 cylinder head connection. Discard seal rings. 19. Remove the six banjo bolts retaining the cylinder head coolant vent line. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 4-29