4.6 CYLINDER HEAD COOLANT VENT LINE 20. Remove the cylinder head coolant vent line. Discard seal rings. See Figure 4-19. 1. Doser Injector Coolant Line 5. Coolant Vent Line Banjo Bolt (6 qty.) 2. Doser Injector Coolant Line Seal Rings 6. Coolant Vent Line 3. Doser Injector Coolant Line Banjo Bolt 7. Coolant Vent Line Banjo Bolt 4. Coolant Vent Line Seal Rings (15 qty.) 8. Banjo Union Figure 4-19 Coolant Vent Line 4.6.2 Installation of Cylinder Head Coolant Vent Line Install as follows: 1. Install the cylinder head coolant vent line using new seal rings. Torque the six banjo bolts to 35 N·m (26 lb·ft). 2.
Install the doser injector coolant line to the #6 cylinder head connection using new seal rings. Torque the banjo bolt to 16-20 N·m (12-15 lb·ft). All information subject to change without notice. 4-30 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION