Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 6.1.1 Removal of Air Intake Elbow and Grid Heater Removal steps are as follows: 1. Remove the intake throttle valve and adaptor. Refer to section 6.2.1. 1. Air Intake Manifold 4. Studs & nuts (4 qty.) 2. Gasket 5. Gasket 3. Air Inlet Elbow 6. Grid Heater Figure 6-2 Air Intake Elbow 2. Remove four nuts securing the air intake elbow to the EGR gas mixer. See Figure 6-2. 3. Remove bolt securing support bracket to the air inlet elbow. See Figure 6-2. 4. Remove the bolt, spacer and two isolators securing the support bracket to the alternator bracket. See Figure 6-2. All information subject to change without notice.

DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 6-5