6.2 INTAKE THROTTLE VALVE AND ADAPTOR 6.2 INTAKE THROTTLE VALVE AND ADAPTOR Perform the following procedures for the removal and installation of the intake throttle valve. 6.2.1 Removal of Intake Throttle Valve and Adaptor Removal steps are as follows: 1. Disconnect the hose connection from the charge air cooler to the intake throttle adaptor. 1. Air Inlet Elbow 3. Air Intake Throttle Valve 2. Gaskets Figure 6-4 Air Intake Throttle Valve and Adaptor 2. Disconnect the electrical connector at the intake throttle valve. See Figure 6-4. All information subject to change without notice. 6-8 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION