Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 3. Remove four hex socket-head bolts and remove the intake throttle valve and adaptor and two gaskets from the air intake elbow. Discard gaskets. 6.2.2 Installation of Intake Throttle Valve and Adaptor Installation steps are as follows: 1. Secure the intake throttle valve, two gaskets and the adaptor to the air intake elbow with four hex socket-head bolts (M8 x 90 mm). Torque the bolts to 25 N·m (18 lb·ft). See Figure 6-4. 2. Connect the electrical connector to the intake throttle valve. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 6-9