Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

6.7 TURBOCHARGER 10. Disconnect the air intake elbow from the turbocharger. See Figure 6-18. 1. Turbocharger 4. Turbocharger Outlet Line 2. Air Cleaner Pipe 5. Constant-Torque Clamp 3. Air Intake Elbow 6. Charge Air Cooler Figure 6-18 Turbocharger Air Intake 11. Remove the oil return line from the turbocharger and the cylinder block. [a] Remove the two bolts attaching the oil return line to the bottom of the turbocharger. Discard the gasket. [b] Disconnect the fitting attaching the oil return line to the cylinder block. 12. Remove the oil supply line from the turbocharger and the cylinder block. [a] Remove the two bolts attaching the oil supply line to the turbocharger. Discard the gasket.

[b] Remove the banjo bolt attaching the oil supply line to the cylinder block. Discard the two seal rings. 13. Remove the nuts that attach the turbocharger to the exhaust manifold center section and discard nuts. Remove the turbocharger and exhaust housing. 14. If necessary, remove the exhaust housing from the turbocharger and discard nuts. 15. Remove two studs from the turbocharger. All information subject to change without notice. 6-32 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION