Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL crosswise pattern to ensure the brake gate assembly is seated properly against the center section of the exhaust manifold. See Figure 7-18. 1. Exhaust Manifold Flange 3. Housing Plate 2. Nut (qty 4) 4. Bolt (qty 2) Figure 7-18 Brake Gate Assembly 7. Using a soft head hammer, tap the roll pins until they are properly seated in the plate housing. See Figure 7-19. Figure 7-19 Roll Pin 8. Remove the two nuts from the rear studs and the two nuts and bolts from the front holes. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 7-21