Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 10. Install the turbocharger to the housing plate and secure using two nuts. See Figure 7-21. Figure 7-21 Securing the Turbocharger to the Housing Plate (Step one) 11. Install two nuts to the exhaust manifold center housing studs. See Figure 7-21. 12. Hand tighten the nuts using a criss-cross pattern. Torque the nuts to 50 N·m (37 lb·ft). 13. Refer to section 6.7.3 to complete the turbocharger installation. 14. Install the brake gate actuator and bracket. Refer to section 7.2.2. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 7-23