8.7 EGR CONTROL VALVE 3. Install four bolts and secure the EGR control valve to the thermostat housing. Torque the bolts to 25 N·m (18 lb·ft). 1. EGR Control Valve Cover Mounting Bolts Figure 8-14 EGR Control Valve Cover 4. Secure the EGR control valve cover by installing the mounting bolts at the front lifter bracket and the rear of the EGR valve. Torque the bolts to 25 N·m (18 lb·ft). 5. Connect the electrical connector to the EGR control valve. 6. Install the EGR gas outlet pipe. Refer to section 8.2.2. All information subject to change without notice. 8-24 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION