Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

9.1 DRIVE BELTS 9.1.1 Removal of Main Drive Belt Removal steps are as follows: NOTE: There are two poly-vee drive belts on the MBE 4000 engine. Be sure to remove and install the correct belt(s). 1. Disconnect the batteries. 2. Release the tension on the main drive poly-vee belt. See Figure 9-1. 1. Alternator 3. Belt Tensioner 2. Main Drive Poly-Vee Belt 4. Socket Wrench Figure 9-1 Releasing Belt Tension [a] Place a socket wrench on the tensioner pulley bolt. [b] Pull the socket wrench (rotate the tensioner pulley clockwise) to remove the tension from the poly-vee belt. [c] Hold the tensioner pulley in this position for the next step. All information subject to change without notice.

9-4 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION