EPA07 MBE 4000 SERVICE MANUAL 3. Remove the drive poly-vee belt from the alternator, coolant-pump, AC compressor and idler pulleys. Be careful not to kink, stretch, or otherwise damage the belt. See Figure 9-2. 1. Vibration Damper 4. Idler Pulley 2. Tensioner Pulley 5. Main Drive Poly-Vee Belt 3. Alternator Pulley 6. Coolant Pump Pulley Figure 9-2 Main Drive Poly-Vee Belt 4. Release the tensioner pulley. 5. Inspect the drive poly-vee belt for nicks, wear, or other damage. Replace the belt if necessary. 6. Inspect the following parts and replace any that are damaged or worn:
Vibration damper Alternator pulley Coolant-pump pulley Belt tensioner Tensioner pulley Idler pulley 9.1.2 Installation of Main Drive Belt Installation steps are as follows: All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 9-5