Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

9.1 DRIVE BELTS 1. Fit the main drive poly-vee belt on the belt pulleys. Be careful not to kink, stretch, or otherwise damage the belt. For correct routing, see Figure 9-3. Do not fit the belt onto the tensioner pulley yet. 1. Alternator Pulley 4. Main Drive Poly-Vee Belt 2. Idler Pulley 5. Vibration Damper 3. Coolant Pump Pulley 6. Tensioner Pulley Figure 9-3 Main Drive Poly-Vee Belt Routing 2. Using a socket wrench (rotate the tensioner pulley counterclockwise) to remove the tension from the tensioner on the main drive poly-vee belt. See Figure 9-1. 3. Make sure the poly-vee belt is correctly positioned for the tensioner pulley. 4. Restore the tension on the poly-vee belt.

[a] Release the tension on the socket wrench to return the tensioner pulley to its original position. [b] Remove the socket-wrench bit from the pulley bolt. 5. Check the main drive poly-vee belt to make sure it is in the correct position and properly aligned on the pulleys. 6. Connect the batteries. 9.1.3 Removal of Fan Belt Removal steps are as follows: All information subject to change without notice. 9-6 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION