EPA07 MBE 4000 SERVICE MANUAL 10.1 FRONT POWER TAKE-OFF A Front Power Take-Off (FEPTO) accessory drive is an available engine option. The drive provides continuous live power anytime the engine is operating. The FEPTO is adaptable to a Spicer 1350/1410 drive shaft. 10.1.1 Removal of FEPTO Components Removal steps are as follows: 1. Remove the bolts securing the drive shaft to the FEPTO and remove the shaft. 2. Remove the drive belts from their pulleys as installed. 3. To gain access to the vibration damper, remove the lower mounting bolts from the bottom of the front fairing/bumper. 1. Bolts 2. Plate (Hub) Figure 10-1 FEPTO Hub Plate All information subject to change without notice.
DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 10-3