Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

10.1 FRONT POWER TAKE-OFF 4. Remove six bolts M10 x 30 mm securing the plate (hub) to the intermediate pulley and remove plate. See Figure 10-1. 1. Intermediate Pulley 3. Vibration Damper 2. Vibration Damper Bolts Figure 10-2 FEPTO Intermediate Pulley 5. Remove two M16 x 76 mm bolts securing the intermediate pulley to the front of the crankshaft and install two guide pins (J–46172). See Figure 10-2. 6. Remove the remaining six bolt securing the intermediate pulley and remove the pulley. 7. Remove the vibration damper from the engine. 10.1.2 Installation of FEPTO Components Installation steps are as follows: All information subject to change without notice.

10-4 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION