Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 1. Install guide pins. (J–46172) into the front of the crankshaft. See Figure 10-3. 1. Guide Pins (J-46172) 2. Oil Deflector Figure 10-3 Guide Pin 2. Install the oil deflector and vibration damper over the guide pins. Ensure the rim on the deflector is facing the engine. See Figure 10-3. 1. Intermediate Pulley 3. Vibration Damper Figure 10-4 Vibration Damper and Pulley 3. Install the intermediate pulley over the guide pins. See Figure 10-4. 4. Install eight M16 x 76 mm mounting bolts and secure the intermediate pulley and the vibration damper, Torque the bolts in a criss-cross pattern to 200 N·m (148 lb·ft). Ensure all bolts have been tighten. 5.

Remove the guide pins from the front of the crankshaft. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 10-5