14.1 SCHEDULED INTERVALS 6. Install the new filter into the cap. Make sure the filter element is securely in place. 7. Screw the cap onto the oil filter housing. Tighten the cap 45 N·m (33 lb·ft). 8. Install the oil drain plug, using a new O-ring. Tighten the plug 80 N·m (60 lb·ft). 9. Add new engine oil through the oil fill, see Figure 14-7, until the maximum fill level on the oil dipstick has been reached. Engine fill capacity is 42.0 L (44.4 qts). 1. Oil Fill Cap 2. Oil Dipstick Figure 14-7 Oil Fill ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. 10.
Start the engine with the accelerator pedal in the idle position. Monitor the oil pressure gauge. All information subject to change without notice. 14-14 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION