Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 10. Turn the crankshaft until the marked gear teeth on the camshaft gear line up with the marked tooth on the crankshaft gear. See Figure 1-55. 1. Camshaft Gear 2. Crankshaft Gear 3. Dowel Pin Location Figure 1-55 Aligning the Marked Gear Teeth 11. Remove the crankshaft gear from the crankshaft. Refer to section 1.10.3. 12. Mark the order of the main bearing caps, then remove the main bearing-cap bolts. See Figure 1-56. Figure 1-56 Removal Order, Main Bearing Cap Bolts 13. Loosen the main bearing caps with a plastic hammer, if necessary. Remove the main bearing caps. All information subject to change without notice.

DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-65