Yamaha Motor Corporation, USA 115A/130A/L130A/150A/V150A — MAINTENANCE

E EMU01329 REPLACING FUSE If the fuse has blown on an Electric start model, open the fuse holder and replace the fuse with a new one of proper amper- age. w Be sure to use the specified fuse. An incorrect fuse or a piece of wire may allow excessive current flow. This could cause electrical system damage and a fire hazard. NOTE: If the new fuse blows again immediately, consult a Yamaha dealer. 1 Fuse holder 2 Fuse (20A/30A) EMK78010 CHECKING WIRING AND CONNECTORS 1) Check that each grounding wire is prop- erly secured. 2) Check that each connector is engaged securely.

EXHAUST LEAKAGE Start the engine and check that no exhaust leaks from the joints between the exhaust cover, cylinder head and crank case. WATER LEAKAGE Start the engine and check that no water leaks from the joints between the exhaust cover, cylinder head and crank case. 4-17 V4 w w q q 205034 V6 q 205026* 41 30 12