Operating & maintenance manual 8.1.1 Status and error messages 41 Symbol Function Description Override function drum (green) Indicates that the switch “Override function hydraulic motor drum“ on the control panel next to the joystick is activated. The engine is manually set to its highest swallowing capacity (max. engine torque). Override function rear axle drive (green) Indicates that the switch for the override function of the rear axle has been turned on. The engine is set to its maximum swallowing capacity (max. engine torque). Symbol Function Description Start the Diesel engine again. Contact the Hyundai service team. CAN Bus Failure Start the Diesel engine again.
(Electronic error) Contact the Hyundai service team. Regeneration The exhaust system needs to be cleaned. Regeneration off The automatic regeneration procedure has been deactivated by means of the corresponding switch and will not be performed. General fault message Diesel engine Permanent activation indicates faults related to the engine. Please contact the customer service of the diesel engine manufacturer. Charge air temperature The charge air temperature is too high. DEF Lamp Insufficient fill level in the AdBlue® / DEF tank. Insufficient preliminary fuel pressure Preliminary fuel pressure HEST Lampe (High Exhaust System Temperature Lamp) Indicates excess exhaust temperature, e.g.
during a manually intiated regeneration process. STOP Lamp (Critical fault message Diesel engine) • Indicates critical faults related to the engine. • Stop the Diesel engine immediately! • Please contact the Cummins service team. Water in fuel Immediately empty the prepliminary fuel filter.