Operating & maintenance manual 9 Starting, driving and stopping the compaction roller 9.1 Prior to the initial start 9.1.1 Activating the battery main switch (optional feature) If your compaction roller is equipped with a battery main switch, activate the battery main switch before turning on the ignition. x Open the enigine hood. x Activate the battery main switch. 9.2 Starting the Diesel engine x Insert the ignition key into the ignition lock ( 2 ) and activate the ignition. x Apply the parking brake ( 1 ). As soon as the ignition has been activated, the symbol indicating the application of the parking brake ( 4 ) lights up on the dashboard. x Turn the ignition key to the right:
x Position I : Ignition on and preheating. The symbol for preheating goes out after the preheating phase is completed. The symbols for charge control ( 5 ) and for engine oil pressure ( 6 ) light up. x Position II : Start. The symbols for charge control ( 5 ) and for engine oil pressure ( 6 ) must automatically go out after the Diesel engine has started. x As soon as the engine has started, immediately release your grip on the ignition key. 2 1 3 5 6 Fig. 4 Starting the Diesel engine 48 SAFETY INSTRUCTIONS Obligation to inform yourself! x Inform yourself of all issues related to operating the compaction roller. x Read the safety instructions before starting the compaction roller.
In addition to this, be sure to observe the national and local laws and directives concerning the operation of earth-moving construction machines. In case of doubt, contact your local Hyundai dealer. WARNING Risk of property damage and physical harm caused by limited range of functions of the hydraulic system A warm-up period of 10 minutes with the Diesel engine running at idle speed is required prior to operating the compaction roller! The functions of the roller drum are not available before the hydraulic oil has sufficiently warmed up. WARNING Risk of injuries! Be sure to fasten the safety belt before starting the Diesel engine.